{"title":"JR Kawasaki Nailers \u0026 Staplers","description":"\u003cp\u003eJR Kawasaki Nailers \u0026amp; Staplers for brad nailing and stapling in woodwork and upholstery. Models include the JRK-AS1022J and JRK-ANF30.\u003c\/p\u003e","products":[{"product_id":"jr-kawasaki-jrk-as1022j","title":"JR Kawasaki JRK-AS1022J Air Stapler","description":"\u003cp\u003eThe JR Kawasaki JRK-AS1022J Air Stapler is a lightweight pneumatic fastening tool designed for furniture assembly, upholstery, cabinetry, woodworking, interior finishing, and general workshop applications. Its 100-fastener magazine capacity and operating-pressure range of 0.4–0.7MPa support efficient repetitive fastening when connected to a compatible air compressor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight 1.2kg construction supports easier handling during repetitive fastening work.\u003c\/li\u003e\n\u003cli\u003eMagazine holds up to 100 compatible fasteners to reduce frequent reloading.\u003c\/li\u003e\n\u003cli\u003eOperates within a specified pressure range of 60–100PSI.\u003c\/li\u003e\n\u003cli\u003ePneumatic operation provides consistent driving performance for compatible materials and fasteners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe JR Kawasaki JRK-AS1022J uses compressed air to drive compatible staples into wood, fabric, upholstery backing, and other approved materials. It is suitable for production and installation work where faster, more consistent fastening is required compared with manual stapling.\u003c\/p\u003e\n\u003cp\u003eThe tool operates at approximately 0.4–0.7MPa or 60–100PSI. For reliable performance, connect it to an air compressor with suitable delivered airflow and use a regulator, moisture filter, compatible hose, and properly rated fittings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIdeal Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFurniture assembly and upholstery work\u003c\/li\u003e\n\u003cli\u003eCabinet backing and light woodworking\u003c\/li\u003e\n\u003cli\u003eFabric, leatherette, and insulation fastening\u003c\/li\u003e\n\u003cli\u003eInterior finishing and decorative panel installation\u003c\/li\u003e\n\u003cli\u003eWorkshop, repair, and production applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eJR Kawasaki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eJRK-AS1022J\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePneumatic Air Stapler\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.4–0.7MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEquivalent Pressure Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eApproximately 60–100PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMagazine Capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 100 compatible fasteners\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.2kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Source\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCompressed air\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification Note\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe supplied specifications describe the magazine capacity as “100 nails,” although the product is identified as an air stapler. Confirm the required staple series, crown width, wire gauge, leg-length range, and whether the tool also accepts brad nails before publishing final fastener-compatibility information.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility Note\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse only fasteners approved for the JRK-AS1022J and operate the tool within the specified pressure range. Excessive pressure may damage the tool, fastener, or workpiece. Disconnect the air supply before loading fasteners, clearing a jam, adjusting the tool, or performing maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat’s Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 pc JR Kawasaki JRK-AS1022J Air Stapler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIncludes 6 Months Limited Warranty, subject to the manufacturer’s warranty terms and conditions.\u003c\/p\u003e","brand":"JR Kawasaki","offers":[{"title":"Default Title","offer_id":46406600687833,"sku":"JRK-NST-00001","price":1200.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0518\/3592\/8728\/files\/jr-kawasaki-jrk-as1022j-air-stapler-3177721.png?v=1789986727"},{"product_id":"jr-kawasaki-jrk-anf30-air-stapler","title":"JR Kawasaki JRK-ANF30 Air Stapler","description":"\u003cp\u003eThe JR Kawasaki JRK-ANF30 Air Stapler is a lightweight pneumatic fastening tool designed for furniture assembly, woodworking, cabinetry, upholstery, interior finishing, and general workshop applications. Its 100-fastener magazine capacity and operating-pressure range of 0.4–0.7MPa support efficient repetitive fastening when connected to a compatible air compressor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight 1.2kg construction supports comfortable handling during repetitive fastening work.\u003c\/li\u003e\n\u003cli\u003eMagazine accommodates up to 100 compatible fasteners to reduce frequent reloading.\u003c\/li\u003e\n\u003cli\u003eOperates within a specified pressure range of approximately 60–100PSI.\u003c\/li\u003e\n\u003cli\u003ePneumatic operation provides consistent fastener-driving performance for compatible materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe JR Kawasaki JRK-ANF30 uses compressed air to drive compatible fasteners into wood, furniture components, upholstery backing, decorative panels, and other approved materials. It is suitable for workshop and installation applications requiring faster and more consistent fastening than manual tools.\u003c\/p\u003e\n\u003cp\u003eThe tool operates at approximately 0.4–0.7MPa or 60–100PSI. For proper operation, connect it to a compatible air compressor using a regulator, moisture filter, suitable air hose, and correctly rated fittings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIdeal Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFurniture assembly and repair\u003c\/li\u003e\n\u003cli\u003eCabinetry and light woodworking\u003c\/li\u003e\n\u003cli\u003eUpholstery and fabric fastening\u003c\/li\u003e\n\u003cli\u003eInterior finishing and decorative panel installation\u003c\/li\u003e\n\u003cli\u003eWorkshop and production fastening applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eJR Kawasaki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eJRK-ANF30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePneumatic Air Stapler\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.4–0.7MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEquivalent Pressure Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eApproximately 60–100PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMagazine Capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 100 compatible fasteners\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.2kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Source\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCompressed air\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification Note\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe supplied specifications describe the magazine capacity as “100 nails,” while the product is identified as an air stapler. Confirm whether the JRK-ANF30 accepts staples, brad nails, or both. The compatible fastener series, gauge, crown width, and length range should be verified before publication or purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility Note\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse only fasteners approved for the JRK-ANF30 and keep the air pressure within the specified range. Excessive pressure may damage the tool, fastener, or workpiece. Disconnect the air supply before loading fasteners, clearing jams, making adjustments, or performing maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat’s Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 pc JR Kawasaki JRK-ANF30 Air Stapler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIncludes 6 Months Limited Warranty, subject to the manufacturer’s warranty terms and conditions.\u003c\/p\u003e","brand":"JR Kawasaki","offers":[{"title":"Default Title","offer_id":46406645645529,"sku":"JRK-NST-00002","price":1200.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0518\/3592\/8728\/files\/jr-kawasaki-jrk-anf30-air-stapler-4581003.png?v=1789986367"},{"product_id":"jr-kawasaki-jrk-eng1800-electric-nailer-1800w","title":"JR Kawasaki JRK-ENG1800 Electric Nailer 1800W","description":"\u003cp\u003eThe JR Kawasaki JRK-ENG1800 Electric Nailer is a 1,800W corded fastening tool designed for woodworking, furniture assembly, cabinetry, interior finishing, and other compatible installation applications. Its electric operation eliminates the need for a separate air compressor, air hose, and pneumatic fittings, making it a practical option for workshops and jobsites with access to a compatible 220V power supply.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePowerful 1,800W rated input supports compatible fastening applications.\u003c\/li\u003e\n\u003cli\u003eCorded electric operation eliminates the need for an external air compressor.\u003c\/li\u003e\n\u003cli\u003e220V, 60Hz electrical rating is suitable for compatible local workshop power supplies.\u003c\/li\u003e\n\u003cli\u003eSuitable for repetitive fastening in woodworking, furniture, and interior-finishing projects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe JR Kawasaki JRK-ENG1800 uses electrical power to drive compatible nails or fasteners into approved materials. It is intended for applications where a portable pneumatic system may be inconvenient or where continuous operation from a mains power supply is preferred.\u003c\/p\u003e\n\u003cp\u003eThe supplied specifications list an operating rate of 30 TPM. This may refer to a firing rate or fasteners driven per minute, but the meaning of TPM was not defined. The exact compatible nail type, gauge, length range, magazine capacity, firing modes, and operating rate should be confirmed before publication or purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIdeal Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFurniture assembly and repair\u003c\/li\u003e\n\u003cli\u003eCabinetry and light woodworking\u003c\/li\u003e\n\u003cli\u003eInterior trim and finishing work\u003c\/li\u003e\n\u003cli\u003eDecorative panel and molding installation\u003c\/li\u003e\n\u003cli\u003eWorkshop and general construction fastening\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eJR Kawasaki\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eJRK-ENG1800\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCorded Electric Nailer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRated Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1,800W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e220V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRated Frequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProvided Operating Rate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30 TPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Source\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCorded electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification Verification Note\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe provided specification states “Operating Pressure: 30 TPM.” An electric nailer does not normally use pneumatic operating pressure, and TPM is not a pressure unit. This may instead indicate a firing rate of approximately 30 fasteners per minute. Verify the correct meaning with the supplier and confirm the compatible nail type, nail size, magazine capacity, firing mode, tool weight, and cord length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility Note\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse only fasteners specifically approved for the JRK-ENG1800. The correct nail gauge, head style, collation type, and length range must match the tool. Disconnect the machine from the power supply before loading fasteners, clearing a jam, inspecting the nose assembly, or performing maintenance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat’s Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 pc JR Kawasaki JRK-ENG1800 Electric Nailer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIncludes 6 Months Limited Warranty, subject to the manufacturer’s warranty terms and conditions.\u003c\/p\u003e","brand":"JR Kawasaki","offers":[{"title":"Default Title","offer_id":46406655049945,"sku":"JRK-NST-00003","price":2400.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0518\/3592\/8728\/files\/jr-kawasaki-jrk-eng1800-electric-nailer-1800w-7556577.png?v=1789986367"},{"product_id":"jr-kawasaki-u-nails","title":"JR Kawasaki U-Nails","description":"\u003cp\u003eThe JR Kawasaki U-Nails are fastening staples designed for compatible pneumatic or electric staplers that accept 10mm crown U-shaped fasteners with a 0.6mm wire thickness. Available in lengths from 6mm to 22mm, they are suitable for upholstery, fabric attachment, light woodworking, insulation, screening, crafts, packaging, and general fastening applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConsistent 10mm nail head or crown width across all available models.\u003c\/li\u003e\n\u003cli\u003e0.6mm wire thickness supports compatible light-duty fastening work.\u003c\/li\u003e\n\u003cli\u003eAvailable in seven nail lengths from 6mm to 22mm.\u003c\/li\u003e\n\u003cli\u003eMultiple sizes allow users to match the fastener length to the workpiece thickness.\u003c\/li\u003e\n\u003cli\u003eSuitable for upholstery, fabric, thin wood, board, screen, insulation, and craft applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Overview\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe JR Kawasaki U-Nail Series consists of narrow-wire staples designed to be driven into compatible materials using a correctly matched stapler. Each model has a 10mm crown width and 0.6mm wire thickness, while the leg length varies depending on the required penetration depth.\u003c\/p\u003e\n\u003cp\u003eShorter 6mm to 10mm nails are suitable for thinner materials and shallow fastening, while the longer 13mm to 22mm models provide increased penetration for thicker compatible workpieces. Stapler compatibility must be confirmed using the crown width, wire gauge, leg length, magazine design, and manufacturer-approved fastener range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIdeal Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUpholstery fabric and furniture repair\u003c\/li\u003e\n\u003cli\u003eAttaching cloth, leather, vinyl, and similar materials\u003c\/li\u003e\n\u003cli\u003eLight woodworking and panel fastening\u003c\/li\u003e\n\u003cli\u003eScreen, mesh, and insulation installation\u003c\/li\u003e\n\u003cli\u003eCraft, packaging, and general workshop applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAvailable Models and Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ccolgroup\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003ccol\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eCrown Width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eNail Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eWire Thickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePrice\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJRKUN1006J\u003c\/td\u003e\n\u003ctd\u003e10mm\u003c\/td\u003e\n\u003ctd\u003e6mm\u003c\/td\u003e\n\u003ctd\u003e0.6mm\u003c\/td\u003e\n\u003ctd\u003e₱125.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJRKUN1008J\u003c\/td\u003e\n\u003ctd\u003e10mm\u003c\/td\u003e\n\u003ctd\u003e8mm\u003c\/td\u003e\n\u003ctd\u003e0.6mm\u003c\/td\u003e\n\u003ctd\u003e₱140.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJRKUN1010J\u003c\/td\u003e\n\u003ctd\u003e10mm\u003c\/td\u003e\n\u003ctd\u003e10mm\u003c\/td\u003e\n\u003ctd\u003e0.6mm\u003c\/td\u003e\n\u003ctd\u003e₱155.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJRKUN1013J\u003c\/td\u003e\n\u003ctd\u003e10mm\u003c\/td\u003e\n\u003ctd\u003e13mm\u003c\/td\u003e\n\u003ctd\u003e0.6mm\u003c\/td\u003e\n\u003ctd\u003e₱185.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJRKUN1016J\u003c\/td\u003e\n\u003ctd\u003e10mm\u003c\/td\u003e\n\u003ctd\u003e16mm\u003c\/td\u003e\n\u003ctd\u003e0.6mm\u003c\/td\u003e\n\u003ctd\u003e₱220.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJRKUN1019J\u003c\/td\u003e\n\u003ctd\u003e10mm\u003c\/td\u003e\n\u003ctd\u003e19mm\u003c\/td\u003e\n\u003ctd\u003e0.6mm\u003c\/td\u003e\n\u003ctd\u003e₱260.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJRKUN1022J\u003c\/td\u003e\n\u003ctd\u003e10mm\u003c\/td\u003e\n\u003ctd\u003e22mm\u003c\/td\u003e\n\u003ctd\u003e0.6mm\u003c\/td\u003e\n\u003ctd\u003e₱290.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eSize Selection Guide\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSelect the nail length according to the thickness and density of the materials being joined. The staple should penetrate deeply enough to hold the workpiece securely without passing completely through the base material or damaging the opposite surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStapler Compatibility Note\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDo not select U-nails based only on their length. Confirm that the stapler accepts a 10mm crown, 0.6mm wire thickness, and the selected leg length. Similar-looking staples may use different crown widths, wire gauges, profiles, and magazine systems and may not be interchangeable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial and Application Note\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eActual holding strength depends on the fastened material, staple length, substrate density, tool-driving force, spacing, and installation angle. These staples may not be suitable for concrete, masonry, metal plate, structural framing, or other hard materials unless specifically approved.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification Verification Note\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe number of nails per box, staple material, surface coating, corrosion resistance, exact wire profile, compatible stapler models, and packaging dimensions were not included in the supplied specifications. Confirm these details before publication or bulk ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOperating and Safety Note\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDisconnect the stapler from its power or compressed-air supply before loading or clearing fasteners. Wear suitable eye protection, keep hands away from the firing area, and never point the tool toward any person. Test the selected staple length and driving depth on scrap material before beginning the final work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat’s Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 pack JR Kawasaki U-Nails in the selected model and length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWarranty information was not included in the supplied specifications and should be confirmed before publication.\u003c\/p\u003e","brand":"JR Kawasaki","offers":[{"title":"U-Nail 1006J","offer_id":46464263422169,"sku":"JRK-NST-00004-01","price":125.0,"currency_code":"PHP","in_stock":true},{"title":"U-Nail 1008J","offer_id":46464263454937,"sku":"JRK-NST-00004-02","price":140.0,"currency_code":"PHP","in_stock":true},{"title":"U-Nail 1010J","offer_id":46464263487705,"sku":"JRK-NST-00004-03","price":155.0,"currency_code":"PHP","in_stock":true},{"title":"U-Nail 1013J","offer_id":46464263520473,"sku":"JRK-NST-00004-04","price":185.0,"currency_code":"PHP","in_stock":true},{"title":"U-Nail 1016J","offer_id":46464263553241,"sku":"JRK-NST-00004-05","price":220.0,"currency_code":"PHP","in_stock":true},{"title":"U-Nail 1019J","offer_id":46464263586009,"sku":"JRK-NST-00004-06","price":260.0,"currency_code":"PHP","in_stock":true},{"title":"U-Nail 1022J","offer_id":46464263618777,"sku":"JRK-NST-00004-07","price":290.0,"currency_code":"PHP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0518\/3592\/8728\/files\/jr-kawasaki-u-nails-5451471.jpg?v=1789986071"}],"url":"https:\/\/khmtools.com.ph\/collections\/jr-kawasaki-nailers-staplers.oembed","provider":"KHM Megatools Corp.","version":"1.0","type":"link"}