Isang segundo lang, tumalon na ang grinder! Watch Bobby break down a real grinder kick back, then learn why it happens, the 5 common causes, the right way to hold and use an angle grinder, how to clamp and support your workpiece, how to choose the right disc, and the PPE to wear.
Engr. Clark Ferrer (Mr. Contractor) — "Building Trust, Not Just Structures"
Ar. JM Miranda of Raw House Architects — "Small Projects, Bigger Vision"
Mahirap ba talagang matutong mag-welding? Watch Miss Tin explain, then learn why a MIG welder is the easiest to start with, the difference between gasless (flux-core) and may gas (CO2) machines, what you can weld, six safety habits, and how to choose by where you weld.
Pang-gilid lang ba ang palm router? Watch Miss Tin explain, then learn what a palm router (trimmer) does, why 1/4 inch is the most common size in the Philippines, the four bits you will use most (roundover, chamfer, straight and flush trim), six safety habits, and how to choose the right bit for the edge shape you want.
Bakit magaspang ang putol mo sa plywood? Watch Miss Tin explain, then learn what a circular saw does, why 7-1/4 inch is the most common size in the Philippines, the difference between 24T and 40-60T blades, the right blades for aluminum and fiber cement board, a 5-point safety checklist, and how to choose the right blade for your material.
Pang-welder lang ba ang angle grinder? Learn what an angle grinder does, why the 4-inch is the most common size in the Philippines, the four discs you will use most (cutting, grinding, flap and diamond), a 5-point safety checklist, and how to choose the right disc for steel, welds, rust, tiles and concrete.
