Grinder Kick Back: Why It Happens and How to Prevent It
"Isang segundo lang, tumalon na ang grinder." Kick back is when an angle grinder suddenly jumps out of the cut and back toward the person holding it. This guide explains what causes it, the five most common mistakes, the correct way to hold and use a grinder, how to set up your workpiece, how to pick the right disc, and the PPE to wear.
SHOP ANGLE GRINDERS THE RIGHT WAY ↓Watch: Bobby Explains Grinder Kick Back
What Is Kick Back?
Kick back happens when the spinning disc gets pinched or caught in the material. The disc stops suddenly, but the motor keeps turning, so the whole grinder spins and jumps back out of the cut, usually toward your hands, body or face. It happens in a fraction of a second, faster than you can react.
The 5 Most Common Causes
- Wrong cutting direction. Feeding the grinder so the disc climbs out of the cut.
- Pinched disc. The cut closes on the disc because the workpiece is unsupported.
- One-handed use. Without the side handle you can't hold the grinder when it twists.
- Guard removed. Nothing stands between you and the disc.
- Wrong disc. A disc not made for the material, cracked, or rated lower than the grinder's RPM.
The Right Way to Use an Angle Grinder
Always use the side handle
Hold the body with one hand and the side handle with the other. Lost your handle? Get a spare like the Bosch 1602025024 side handle.
Never remove the guard
Position the guard between you and the disc, so sparks and fragments go away from your body.
Stay out of the disc's line
Don't stand directly behind or in front of the disc. If it kicks back, it won't hit you.
Let it reach full speed
Start the grinder away from the material and wait until it reaches full speed before touching the workpiece.
Don't force or twist
Follow the rotation arrow on the grinder head, keep the disc straight in the cut and let the disc do the work.
Grinders we recommend: Bosch GWS 7-100 T (4", 720W, high torque) · Makita DGA402Z (18V cordless) · DCA ADSM06-100 EM (20V brushless).
Clamp and Support the Workpiece
- Clamp it tight in a vise or with clamps, so it can't move while you cut.
- Support both sides of the cut so the cut stays open and can't close on the disc.
Use the Right Disc
- Match the disc to the material: a Bosch 4" cutting disc for metal for steel, an Inox disc for stainless.
- RPM rating: the disc's max RPM must be equal to or higher than your grinder's no-load speed.
- Inspect it first: never use a cracked, chipped or damp disc.
Browse all cutting and grinding discs.
Always Wear PPE
- Face shield or safety goggles, such as the Blue Eagle FC25 face shield.
- Work gloves.
- Long sleeves and no loose clothing that can get caught in the disc.
Bonus: Choose a Grinder with Anti-Restart
If a grinder is left switched on during a brownout, it starts by itself the moment the power comes back. An anti-restart (restart protection) feature keeps it off until you switch it on again, like on the DCA ADSM06-100 EM. Always unplug the grinder or remove the battery before changing discs.
Frequently Asked Questions
Ano ang kick back sa grinder?
Can I remove the guard for a tight spot?
Why does my grinder jerk when I cut?
How do I know if a disc fits my grinder?
Corded or cordless?
Grinder, Side Handle, Disc and Face Shield
Lahat 'yan available sa KHM Megatools. May tanong ka pa? I-message mo lang kami, tutulungan ka naming pumili.
SHOP ANGLE GRINDERS CUTTING & GRINDING DISCS