Pneumatic Tools

Air Powered Tools! You need an Air Compressor to use this tools.
Jump to:
Air Compressor
Pneumatic Drill
Pneumatic Air Impact Wrench
Brad Nailer
Concrete Nailer
Electric Spray Gun
Jet Chisel
Needle Scaler
Pin Nailer
Paint Spray Gun
Stapler Gun
✔ Found a better price? We 100% Price Match it!
Sidebar

Policies

Product Category

Categories (A-Z)

Powertools

Availability

Price

₱
to
₱

Brand

Product type

More filters

Featured Products

Powerhouse 4-Stroke Engine Powered Knapsack / Backpack Agri-Sprayer - KHM Megatools Corp.Powerhouse 4-Stroke Engine Powered Knapsack / Backpack Agri-Sprayer - Goldpeak Tools PH Powerhouse
Powerhouse

Powerhouse 4-Stroke Engine Powered Knapsack / Backpack Agri-Sprayer

GX35 Type Engine / 4- Stroke Specifications Gasoline Engine Type GX35 Type4 -stroke, Single Cylinder Displacement (cc) 35.8 cc Power Output 1.0 Kw / 6,500 rpm Pressure (kg/cm2) 0-30 Spraying Volume 8L/min Tank Capacity 25 L Gross Weight 11.5 kg Plunger Diameter 18 mm...
₱8,600.00
₱8,600.00
Powerhouse Diesel Power Generator (Super Silent Type) - KHM Megatools Corp.Powerhouse Diesel Power Generator (Super Silent Type) - KHM Megatools Corp.
Powerhouse

Powerhouse Diesel Power Generator (Super Silent Type)

Powerhouse Diesel Power Generator (Super Silent Type) Engine Type Model Max Output Price DIESEL GENERATOR SINGLE PHASE WATER COOLED SUPER SILENT TYPE W/ FAWDE ENGINE, STAMFORD TYPE ALTERNATOR & DEEP SEA CONTROLLER ELECTRONIC GOVERNOR (PWH-DSG-30KVA) 30KVA 380,000.00 (PWH-DSG-35KVA) 35KVA 415,000.00 (PWH-DSG-45KVA) 45KVA 498,000.00 (PWH-DSG-60KVA)...
From ₱315,000.00
From ₱315,000.00
Powerhouse Gasless Self Shielded / Fluxcored MIG Welding Wire - Goldpeak Tools PH PowerhousePowerhouse Gasless Self Shielded / Fluxcored MIG Welding Wire - Goldpeak Tools PH Powerhouse
Powerhouse

Powerhouse Gasless Self Shielded / Fluxcored MIG Welding Wire

* NOTE: Compatibility for welding machines may vary.We are currently double checking with supplier which model is compatible with each Fluxcored MIG WIRE. We apologize for any inconvenience.  Size Price FOR MILD STEEL (E71T-GS) 0.9mm / 0.45 kg 280.00 0.9mm / 1 kg 540.00 0.9mm /...
From ₱280.00
From ₱280.00

Same Day Delivery

Filter
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • Featured
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
Sort

Sort by:

  • Featured
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
  • Toku TSG-6S Pneumatic Straight Grinder 6"
    Toku

    Toku TSG-6S Pneumatic Straight Grinder 6"

    Toku TSG-6S Pneumatic Straight Grinder 6" Roll type throttle start. Ideal for removing burs on material, smoothing welds, etc. Wheel/Collet size: 150x25x15.9 Hose Power: 2.1
    ₱78,300.00
    ₱87,000.00
    ₱78,300.00
  • Toku TSG-5S Pneumatic Straight Grinder 5"
    Toku

    Toku TSG-5S Pneumatic Straight Grinder 5"

    Toku TSG-5S Pneumatic Straight Grinder 5" Roll type throttle start. Ideal for removing burs on material, smoothing welds, etc. Wheel/Collet size: 125x19x12.7 Hose Power: 1.4
    ₱63,000.00
    ₱70,000.00
    ₱63,000.00
  • Toku TSG-3F Pneumatic Straight Grinder 3"
    Toku

    Toku TSG-3F Pneumatic Straight Grinder 3"

    Toku TSG-3F Pneumatic Straight Grinder 3" Roll type throttle start. Ideal for removing burs on material, smoothing welds, etc. Wheel/Collet size:  75x13x9.5 Hose Power: 0.7
    ₱27,900.00
    ₱31,000.00
    ₱27,900.00
  • Toku TSG-3CL Pneumatic Die Grinder 6mm (Lever Type)
    Toku

    Toku TSG-3CL Pneumatic Die Grinder 6mm (Lever Type)

    Toku TSG-3CL Pneumatic Die Grinder 6mm (Lever Type) (Industrial Duty) Lever Type Roll type throttle start. Ideal for removing burs on material, smoothing welds, etc.
    ₱48,600.00
    ₱54,000.00
    ₱48,600.00
  • Toku TSG-3C Pneumatic Die Grinder 6mm (Industrial Duty)
    Toku

    Toku TSG-3C Pneumatic Die Grinder 6mm (Industrial Duty)

    Toku TSG-3C Pneumatic Die Grinder 6mm (Industrial Duty) Roll type throttle start. Ideal for removing burs on material, smoothing welds, etc.
    ₱44,100.00
    ₱49,000.00
    ₱44,100.00
  • Toku TG-38Z Pneumatic Die Grinder 6mm (Industrial Duty)
    Toku

    Toku TG-38Z Pneumatic Die Grinder 6mm (Industrial Duty)

    Toku TG-38Z Pneumatic Die Grinder 6mm (Industrial Duty) Roll type throttle start. Front exhaust type. 1/4" collet chuck is available as an option. Ideal for removing burs on material, smoothing welds, etc
    ₱23,400.00
    ₱26,000.00
    ₱23,400.00
  • Toku TG-25Z-ll Pneumatic Die Grinder (Industrial Duty)
    Toku

    Toku TG-25Z-ll Pneumatic Die Grinder (Industrial Duty)

    Toku TG-25Z-ll Pneumatic Die Grinder (Industrial Duty Roll type throttle start. Front exhaust type. Ideal for removing burs on material, smoothing welds, etc.
    ₱26,100.00
    ₱29,000.00
    ₱26,100.00
  • Toku MG-7236B Pneumatic Angle Head Die Grinder 6mm (Front Exhaust)
    Toku

    Toku MG-7236B Pneumatic Angle Head Die Grinder 6mm (Front Exhaust)

    Toku MG-7236B Pneumatic Angle Head Die Grinder 6mm (Front Exhaust) Compact, light-weight and handy grinder. Lever type throttle start. 90 degree angle head allows flexible work in limited work space. 1/4" collet chuck is available as an option. Ideal for removing burs on material,...
    ₱14,400.00
    ₱16,000.00
    ₱14,400.00
  • Toku MG-7206B Pneumatic Die Grinder 6mm (Rear Exhaust)
    Toku

    Toku MG-7206B Pneumatic Die Grinder 6mm (Rear Exhaust)

    Toku MG-7206B Pneumatic Die Grinder 6mm (Rear Exhaust) Lever type throttle start. Rear exhaust type. 1/4" collet chuck is available as an option. Ideal for removing burs on material, smoothing welds, etc.
    ₱10,350.00
    ₱11,500.00
    ₱10,350.00
  • Toku MG-7204B Pneumatic Die Grinder 6mm (Front Exhaust)
    Toku

    Toku MG-7204B Pneumatic Die Grinder 6mm (Front Exhaust)

    Toku MG-7204B Pneumatic Die Grinder 6mm (Front Exhaust) Compact, light-weight and handy type. Lever type throttle start. Front exhaust type. 1/4" collet chuck is available as an option. Ideal for removing burs on material, smoothing welds, etc.
    ₱9,000.00
    ₱10,000.00
    ₱9,000.00
  • Toku MG-20 Pneumatic Mini Die Grinder 6mm (Front Exhaust)
    Toku

    Toku MG-20 Pneumatic Mini Die Grinder 6mm (Front Exhaust)

    Toku MG-20 Pneumatic Mini Die Grinder 6mm (Front Exhaust) Lever type throttle start. Front exhaust type. 1/4" collet chuck is available as an option. Ideal for removing burs on material, smoothing welds, etc.
    ₱9,450.00
    ₱10,500.00
    ₱9,450.00
  • Toku TFC-200 Pneumatic Flux Chipper C/W C15
    Toku

    Toku TFC-200 Pneumatic Flux Chipper C/W C15

    Toku TFC-200 Pneumatic Flux Chipper C/W C15 Compact and light-weight design contributes to easy handling of tool. Ideal for light duty and surface finish chipping work such as removing slag, burrs, rust, and old paint.
    ₱19,800.00
    ₱22,000.00
    ₱19,800.00
  • Toku TFC-200F Pneumatic Flux Chipper C/W C20
    Toku

    Toku TFC-200F Pneumatic Flux Chipper C/W C20

    Toku TFC-200F Pneumatic Flux Chipper C/W C20 Compact and light-weight design contributes to easy handling of tool. Ideal for light duty and surface finish chipping work such as removing slag, burrs, rust, and old paint.
    ₱19,800.00
    ₱22,000.00
    ₱19,800.00
  • Toku AFC-30N Pneumatic Needle Scaler (Straight Body)
    Toku

    Toku AFC-30N Pneumatic Needle Scaler (Straight Body)

    Toku AFC-30N Pneumatic Needle Scaler (Straight Body) Toku Needle Scaler (Straight Body)
    ₱47,700.00
    ₱53,000.00
    ₱47,700.00
  • Toku AFC-30C Pneumatic Chisel Scaler (Straight Body)
    Toku

    Toku AFC-30C Pneumatic Chisel Scaler (Straight Body)

    Toku AFC-30C Pneumatic Chisel Scaler (Straight Body) Toku Chisel Scaler (Straight Body)
    ₱31,500.00
    ₱35,000.00
    ₱31,500.00
  • Toku AFC-30CN Pneumatic Chisel/Needle Scaler (Straight Body)
    Toku

    Toku AFC-30CN Pneumatic Chisel/Needle Scaler (Straight Body)

    Toku AFC-30CN Pneumatic Chisel/Needle Scaler (Straight Body) Toku Chisel/Needle Scaler (Straight Body) Comes with chisel and needle attachment.
    ₱47,700.00
    ₱53,000.00
    ₱47,700.00
  • Toku TS-2 Pneumatic Scaling Hammer (Single Head)
    Toku

    Toku TS-2 Pneumatic Scaling Hammer (Single Head)

    Toku TS-2 Pneumatic Scaling Hammer (Single Head) Piston Diameter: 30mm Piston Stroke: 30mm Net Weight: 2.2kg Blow per Minute: 8000bpm Overall Length: 500mm Air Consumption: 0.3m3/min. Air Inlet: PT 3/8" Hose Size: 1/2"  Working Pressure: 0.6MPa
    ₱22,050.00
    ₱24,500.00
    ₱22,050.00
  • Toku AFC-20N Pneumatic Needle Scaler
    Toku

    Toku AFC-20N Pneumatic Needle Scaler

    Toku AFC-20N Pneumatic Needle Scaler Toku Needle Scaler (3 mm x 13 pcs Needle)
    ₱46,800.00
    ₱52,000.00
    ₱46,800.00
  • Toku AFC-20C Pneumatic Chisel Scaler
    Toku

    Toku AFC-20C Pneumatic Chisel Scaler

    Toku AFC-20C Pneumatic Chisel Scaler Toku Chisel Scaler
    ₱31,500.00
    ₱35,000.00
    ₱31,500.00
  • Toku AFC-20CN Pneumatic Chisel/Needle Scaler
    Toku

    Toku AFC-20CN Pneumatic Chisel/Needle Scaler

    Toku AFC-20CN Pneumatic Chisel/Needle Scaler Toku Chisel/Needle Scaler Comes with chisel and needle attachment.
    ₱46,800.00
    ₱52,000.00
    ₱46,800.00

Recently Viewed Products