Power Cutting Tools

Last updated: June 2026 | KHM Megatools Editorial Team — Power Tool Specialists

Power Cutting Tools Philippines — Circular Saws, Angle Grinders, Miter Saws & More

Power cutting tools are the workhorses of every Filipino construction site, fabrication shop, and finish carpentry operation. From breaking down plywood sheets for cabinet builds, to cutting rebar and structural steel, to trimming baseboard and door casings — the right cutter matches the material, cut type, and duty cycle. This collection covers the full range of power cutting tools KHM Megatools carries across all major brands, engineered for the 220V × 60Hz Philippine standard (corded) or the 18V/20V/40V cordless platforms used by professional contractors nationwide.

Power Cutting Tool Categories in This Collection

• Circular Saws — 5-1/2", 7-1/4", and 9-1/4" blade sizes; corded and cordless models for plywood, lumber, and sheet goods breakdown
• Angle Grinders — 4", 4-1/2", 5", 7", and 9" for metal cutting, grinding, masonry, and tile work (the most versatile jobsite cutter)
• Miter Saws & Sliding Compound Miter Saws — 7-1/4", 10", and 12" for trim, framing, crosscuts, and repeatable angled cuts
• Table Saws & Jobsite Saws — 10" precision saws for cabinet stock, sheet goods, and shop production work
• Jigsaws — variable-speed with orbital action for curves, scroll work, and plunge cuts
• Reciprocating Saws (Sawzalls) — for demolition, plumbing rough-in, pruning, and rough cutting
• Cut-Off Saws / Chop Saws — 14" abrasive and cold-cut models for steel stock, rebar, and structural cutting
• Band Saws — vertical and portable models for resawing, curve cutting, and metal stock
• Tile Cutters & Wet Saws — diamond blade, water-fed cutting for ceramic, porcelain, and natural stone
• Metal Cutters & Nibblers — specialized shears for sheet metal and gutter work
• Replacement Blades & Discs — circular saw blades, jigsaw blades, reciprocating blades, cutting discs, and diamond blades for every tool above

Top Cutting Tool Brands at KHM Megatools

Choosing the Right Power Cutting Tool

Corded vs Cordless — Which Should You Buy?

Expert Tips for Power Cutting Tools

• Match the blade or disc to the material — always. Never use a wood blade on metal (the teeth shatter and become projectiles). Never use a grinding wheel as a cutting disc (it can explode). Always verify the disc's max RPM rating meets or exceeds the tool's spindle speed.
• Sharp blades are safer than dull ones. Dull blades force operators to push harder, which increases kickback risk and produces burned, ragged cuts. Replace circular saw blades and cutting discs before they fail — a ₱200 blade protects a ₱15,000 saw.
• Wear PPE that matches the material. Cutting masonry, fiber cement, and pressure-treated wood requires N95+ respiratory protection (silica dust is a serious lung hazard). Cutting metal requires full face shield + hearing protection + cut-resistant gloves. Never skip PPE on "quick cuts."
• Support the offcut. Unsupported pieces bind the blade and cause kickback or splintered cuts. Use saw horses, roller stands, or miter saw extension wings. For circular saw cuts on plywood, support the entire sheet on foam insulation boards — clean cuts, no blade binding.
• For clean cabinet-grade cuts on plywood and laminate, use a 60T+ blade on circular saws (80T+ on miter saws), place the good face DOWN on a circular saw (UP on a table saw), and apply masking tape along the cut line to reduce tear-out on visible surfaces.
• Respect the RPM rating on cutting discs. A 4-1/2" cutting disc rated 13,300 RPM cannot be used on a 6" grinder spinning at 10,000 RPM if disc diameter changes; check both disc rating AND tool spindle speed. Overspeeded discs are the #1 cause of grinder disc explosions in Philippine shops.

Why Filipino Contractors Buy Cutting Tools at KHM Megatools

• Complete cross-brand selection — Makita, DeWalt, Bosch, Milwaukee, Hikoki, DCA, Ingco, Total, Stanley all under one roof for direct comparison
• Price Match Program and same-day Metro Manila delivery on in-stock items
• Tier-matched consulting — our team helps you match tool tier to actual duty cycle instead of overspending on premium or undersizing on value
• Physical showroom at 940 Blumentritt Rd, Sampaloc — inspect saws, feel weight, test triggers before purchase
• Bulk and contractor pricing for construction crews, fabrication shops, and rental fleets
• Full accessory ecosystem — blades, discs, guides, and replacement parts stocked alongside the tools

Related Collections

• Circular Saws Philippines
• Angle Grinders Philippines
• Miter Saws Philippines
• Cutting Discs & Grinding Wheels
• All Power Tools Philippines