DCA Woodworking Tools Philippines 2026
Routers, Planers & Sanders for Workshop Projects
Good woodworking depends on more than cutting boards to size. Edges must be shaped, surfaces leveled, material thickness corrected, and the final work prepared for finishing.
This guide looks at DCA routers, wood planers, palm sanders, and drum sanders for carpentry, cabinetry, furniture making, renovation, and workshop projects.
SHOP DCA WOODWORKING TOOLS FIND YOUR WORKSHOP TOOL ↓Routers, planers, and sanders all remove material — but they solve very different woodworking problems.
A router shapes edges and creates grooves. A planer removes a controlled layer across the wood surface. A sander refines the material after machining and prepares it for paint, stain, varnish, or final assembly.
DCA's current KHM lineup includes compact routing tools, 82mm and 110mm planers, palm sanders, finishing sanders, belt sanders, and a heavy-duty drum sander. :contentReference[oaicite:1]{index=1}
Route, Plane, Sand — Three Different Stages of the Job
1. Route & Trim
A router or trimmer removes material along an edge, groove, recess, or template path.
Common jobs:- Laminate trimming
- Edge shaping
- Grooves and slots
- Decorative profiles
- Template work
2. Plane & Level
A hand planer removes a controlled layer of wood across a wider surface.
Common jobs:- Leveling timber
- Reducing thickness
- Correcting uneven edges
- Door fitting
- Smoothing rough lumber
3. Sand & Finish
Sanding removes machining marks, smooths surfaces, and prepares the project for finishing.
Common jobs:- Surface smoothing
- Paint preparation
- Furniture refinishing
- Edge blending
- Final finishing
DCA Palm Router — Compact Control for Edges & Trimming
A palm router is smaller and lighter than a large plunge router, making it especially useful for trimming and edge-detail work.
High Speed
Small router bits often operate at very high rotational speeds. The DCA AMP02-6 is currently rated at 30,000 RPM. :contentReference[oaicite:2]{index=2}
1/4" / 6.35mm Collet
The AMP02-6 accepts a 6.35mm cutting capacity, corresponding to the common 1/4-inch router-bit shank class. :contentReference[oaicite:3]{index=3}
Compact Body
At approximately 1.8kg, it is designed around maneuverability and close control during trimming work. :contentReference[oaicite:4]{index=4}
DCA AMP02-6 Palm Router / Trimmer 1/4" 350W
The AMP02-6 is a lightweight DCA routing option for smaller edge and trimming applications.
KHM currently lists it at 350W, 30,000 RPM, a 6.35mm cutting capacity, and approximately 1.8kg. :contentReference[oaicite:5]{index=5}
Best for: laminate trimming, edge work, light grooving, cabinetry, and compact workshop projects.
VIEW AMP02-6 →DCA Wood Planers — Remove Material Quickly & Evenly
Electric hand planers are designed to remove a controlled layer of wood as the machine moves across the workpiece.
Two specifications matter immediately: planing width and maximum planing depth.
82mm / 3-1/4" Class
Compact enough for doors, timber edges, frames, and general carpentry.
110mm / 4-3/8" Class
Covers a wider strip with each pass, which can help on larger boards and workshop work.
DCA AMB04-82 Wood Planer 3-1/4" 500W
The AMB04-82 is a compact 82mm planer aimed at everyday carpentry and fitting work.
KHM currently lists 500W, 16,000 RPM, 82mm maximum planing width, 1mm maximum depth, and approximately 2.4kg. :contentReference[oaicite:6]{index=6}
Best for: door fitting, timber edges, frames, boards, and general site carpentry.
VIEW AMB04-82 →DCA AMB110 Wood Planer 4-3/8" 840W
The AMB110 moves into a wider and more powerful class for users who need greater material-removal capability.
KHM lists 110mm planing width, 2mm planing depth, 840W rated power, 16,500 RPM, and 4.2kg net weight. :contentReference[oaicite:7]{index=7}
Best for: larger boards, workshop furniture projects, wider timber, and more demanding planing.
VIEW AMB110 →DCA Sanders — From Finish Preparation to Heavy Surface Work
Sanding is not one single job. The best machine depends on how much material must be removed and how refined the final surface needs to be.
DCA ASB03-100S Palm Sander 240W
DCA describes this model as combining low vibration with high sanding performance.
KHM currently lists 240W, 14,000 no-load speed, a 110 × 100mm pad, and approximately 1.3kg. :contentReference[oaicite:8]{index=8}
Best for: furniture preparation, doors, panels, painted surfaces, and general finish sanding.
VIEW ASB03-100S →DCA ASN100 Drum Sander
The ASN100 is a very different machine from a palm sander. It is designed around stronger torque and larger drum-style surface conditioning.
KHM currently lists 1400W rated input, a 690–3800 RPM speed range, a Ø120 × 100mm wheel size, and approximately 4.7kg. The listing also notes two-stage gear transmission and constant-power/constant-speed support. :contentReference[oaicite:9]{index=9}
Best for: larger surface preparation, aggressive sanding, brushing, conditioning, and workshop restoration work.
VIEW ASN100 →Which DCA Tool Fits Your Project?
DCA Woodworking Tool Comparison
| Model | Tool Type | Power | Key Spec | Best Use |
|---|---|---|---|---|
| AMP02-6 | Palm Router | 350W | 30,000 RPM / 6.35mm | Trimming & edge work |
| AMB04-82 | Wood Planer | 500W | 82mm width / 1mm depth | Doors & general carpentry |
| AMB110 | Wood Planer | 840W | 110mm width / 2mm depth | Wider timber & workshop use |
| ASB03-100S | Palm Sander | 240W | 110 × 100mm pad | Finish preparation |
| ASN100 | Drum Sander | 1400W | Ø120 × 100mm / variable speed | Heavy surface conditioning |
Choose by Workshop Project
Cabinet Making
A palm router helps with edge work and trimming, while a finishing sander prepares panels for final coating.
Door Installation
A hand planer is particularly useful when a door edge needs controlled material removal.
Furniture Building
Plan rough timber first, route details and edges, then sand before finishing.
Furniture Restoration
Sanders become the priority when removing old coatings, smoothing repairs, and preparing existing surfaces.
Laminate Work
A compact palm router is particularly useful for trimming laminate flush to the substrate.
Rough Timber Preparation
Start with the planer to correct high areas before moving into progressive sanding.
Planer vs Sander — They Are Not Interchangeable
Both remove wood, but they do so at very different rates.
A planer is for dimensioning and leveling. It removes a measurable layer of material with cutting blades.
A sander is for surface refinement. It removes smaller amounts with abrasive paper or a sanding drum.
If a board is significantly uneven, sanding alone can take too long. Plane first, then sand.
Router Bits Determine What the Router Can Do
A palm router is only part of the system. The bit profile determines the actual cut.
Sanding Grit Matters as Much as the Sander
Coarse Grit
Faster material removal, coating removal, and rough surface correction.
Medium Grit
General smoothing after rough sanding or machining.
Fine Grit
Final preparation before coating or between finishing stages where appropriate.
Progressive sanding generally produces a better finish than jumping directly from very coarse to very fine abrasive.
Woodworking Safety Essentials
- Secure the workpiece before routing, planing, or sanding.
- Wear suitable eye protection.
- Use hearing protection where required.
- Control wood dust and use appropriate respiratory protection.
- Inspect router bits, planer blades, and sanding accessories before use.
- Allow cutting tools to reach operating speed before entering the material.
- Feed routers in the correct direction for the setup and application.
- Do not exceed the rated planing depth in one aggressive pass.
- Disconnect power before changing blades, bits, or abrasives.
DCA Woodworking Tool Buying Checklist
- Do you need shaping, leveling, or finishing?
- What size wood pieces do you normally work with?
- What router-bit shank or planer width do you require?
- How much material must be removed?
- Is a compact 82mm planer enough, or do you need 110mm?
- Do you need finish sanding or aggressive surface conditioning?
- How important are weight and maneuverability?
- Are replacement abrasives, blades, or bits readily available?
- Will the tool be used occasionally or every day in the workshop?
Frequently Asked Questions
What is the DCA AMP02-6 used for?
Which DCA planer is better for doors?
When should I choose the DCA AMB110?
What is the DCA ASB03-100S palm sander best for?
What is the difference between a palm sander and drum sander?
Should I plane or sand wood first?
Final Verdict: Build the Workshop Around the Process
Choose the DCA AMP02-6 palm router when your work involves trimming, grooves, and edge profiles.
Choose the AMB04-82 for compact everyday planing, or step up to the wider AMB110 for larger boards and heavier material removal.
For final preparation, the ASB03-100S palm sander is the more refined option, while the ASN100 drum sander moves into heavy surface conditioning.
The best woodworking setup is a sequence: shape with the router, level with the planer, and refine with the right sander.
Build Your DCA Woodworking Setup at KHM Megatools
Browse DCA routers, wood planers, palm sanders, drum sanders, and other workshop tools for carpentry, cabinetry, furniture work, and finishing.
VIEW ROUTERS & PLANERS → VIEW SANDERS → SHOP ALL DCA →
