5 Types of Footing Explained: Isolated, Combined, Eccentric, Mat and Pile (Plus the Tools for Each Step)
"Alam mo ba kung bakit HINDI lumulubog ang bahay mo?" Stand a post straight on the soil, load it, and it sinks. The fix is the footing: a wider "foot" under every column that spreads the weight into the ground. This guide walks through the 5 common footing types in plain Taglish, when each one is used, and the tools you need to dig, compact, tie rebar and pour.
SHOP CONSTRUCTION TOOLS SAFETY MUNA ↓Watch: Joanne Explains the 5 Footing Types
Why Does a House Need a Footing?
A column carries the weight of the floors and roof above it. If it stands directly on the soil, all that weight presses on its small tip, and the soil gives way: the post sinks. A footing is a wide concrete pad under the column that spreads the same weight over a much bigger area, so the soil can carry it.
Why rebar? The soil pushes up on the footing, so its underside gets stretched. Concrete is strong when squeezed but weak when stretched, so a mat of steel bars (lengthwise and crosswise, "parang banig") goes in the bottom of the footing to take that pull.
The 5 Footing Types
Isolated footing
One square pad under one column, with a rebar mat at the bottom. Used for most columns in a typical house.
Combined footing
When two columns are so close that their footings would overlap, they share one long footing.
Eccentric footing + strap beam
The footing can't cross into the neighbor's lot, so the column sits at the edge of its footing. The uneven load makes it tip, so a strap beam ties it to an inner footing to balance it.
Mat footing
When the soil is soft across the whole lot, footings grow until they touch. Instead, all columns sit on one big reinforced slab.
Pile footing
Long piles go down to the hard layer, with a pile cap on top that carries the column.
Quick Comparison
| Footing | When it's used | Key idea |
|---|---|---|
| Isolated | Normal columns on good soil | One pad per column |
| Combined | Two columns close together | One shared long footing |
| Eccentric | Columns on the property line | Needs a strap beam to stay balanced |
| Mat | Soft soil across the whole lot | One big slab under all columns |
| Pile | Hard soil is very deep | Long piles down to the hard layer |
Step 1: Prepare the Ground
Demolition hammer / breaker
Makita HM1317C Demolition Hammer · Total TH220502 Electric Breaker
Plate compactor or tamping rammer
Compacted soil keeps the footing from settling. Sakae Fuji Plate Compactor · Best & Strong Tamping Rammer
Step 2: The Rebar Mat
Rebar tying machine
About a second per tie, a big help on mat footings. Makita DTR180Z · Read our rebar tying machine guide
Step 3: Mix, Pour and Vibrate
- Mix it well: an even mix pours and sets evenly. Total TD614001 Power Mixer
- Don't skip the vibrator: it removes trapped air so the footing has no voids or honeycomb. Powerhouse EY20 Concrete Vibrator Set
- Pile heads: the top of a cast pile is trimmed with a breaker before the pile cap. Milwaukee KANGO900K Demolition Hammer
Safety Muna
- Wear PPE: hard hat, safety shoes, gloves and ear protection (breakers and compactors are loud).
- Protect your eyes and lungs when breaking concrete or rock.
- Read the manual of every machine before use, and keep guards in place.
Frequently Asked Questions
Which footing type is used in most houses?
Why does a footing need rebar?
What is a strap beam for?
When is a mat or pile footing needed?
Why use a concrete vibrator?
Get the Right Tools for Your Foundation Work
Lahat ng tools na nakita mo, available sa KHM Megatools: breakers, compactors, rebar tools, mixers at vibrators. May tanong ka pa? I-message mo lang kami.
CONSTRUCTION TOOLS CONCRETE VIBRATORS LIGHT CONSTRUCTION MACHINES